Torrey Cullen - posted 10:57, Tuesday 01 August 2023 - last comment - 12:55, Tuesday 01 August 2023(11262)
Cryolab Setup Diagrams and Lock Settings in multi-instrument mode
Attached are
1. The laser lock box settings via screenshot in multi-instrument mode using the PLL as the modulation setting.
2. Diagram of multi-instrument mode for reference.
3. Ariel photo of the set up.
4. Inkscape drawing of the set up.
Also should note when scanning the cavity using the current it should be safe to use the full range (2V). The TEC controller should be set to ~10.5kOhms, but double check the range on the integrator is roughly centered.
Images attached to this report
Non-image files attached to this report
Comments related to this report
https://imgur.com/a/udiuJuG
The log isn't letting me upload the photo of the lab. Uploaded to imgur instead.
I was able to upload the file here