[Alex]

In the netork settings page I have set the static IPv4 addresses for the Moku Pros and the Siglent SDS2104X HD Oscillascope.

See image bellow for their settings, but the curernt IP addresses were used to store as their static IP's.

To do this for another device, navigate to the network page at: http://192.168.50.1/ and login.

To set a new static IP:

     Navigate to the LAN sidebar tab under advanced settings.

     At the top, go to the DHCP Server tab, and at the bottom you will see a table labled: "Manually Assigned IP around the DHCP list (Max Limit : 64)"

    Set a new static IP by adding the Mac address of the device, the IP you wish to set, leave DNS servers blank, and put a descriptor of the device under Host Name.

To see a list of all network attached devices:

     Navigate to the Network Map sidebar tab.

     You will see a network flow chart and in the bottom left box under Clients click on "View List"

For more help come ask Alex or Ian.