[Torrey, Ian]

-Noticeable bump on SHG sled, things were realigned.

-Decent initial alignment into AOM. Going for power on now. 24 V, 0.9 A DC supply per the requirements of the 2 W amplifier we have. https://www.minicircuits.com/pdfs/ZHL-1-2W+.pdf 

-According to RF amplifier the absolute input Vpp is 2 V (10 dBm). We are going to start with a 20th of this, 0.1Vpp. This should correspond -16 dbm to start with a ~35 dbm boost giving 19 dbm. This corrersponds to 0.080W.  No observed diffraction.

-Bump it up to 0.317 Vpp. This is -6 dbm. +33 dbm boost min gives 27 dbm, which is .5 W. No observed diffraction. Going to change alignment now.

-No visible difference when changing alignment on PY005. Need a different strategy for now. Not sure if we're under driving the AOM either. RF input signal is powered off and disconnected for now.