Shack Hartmann Wavefront Sensor Materials Requirements:
PBS, 1”, 775 nm: PBS25-780 or PBS255 (same price, 2nd broadband 700 nm to 1300 nm)
KM100 PM (PBS mount)
PM4 (clamping arm for PBS)
2.5” Tall, 1” diameter pedestal post with #8 tap and 0.25” spacer
Clamp
Lambda: WPOM-25.4-20.0CQ-0-4-780
RSP1 (wave plate holder)
1/2” post (or 3.6” of 1” diameter post and spacers)
1/2 post base
PY005 + PY005A
*RS05P
Note: Optic Center at 4.152” (1.44” stage height and Mount to Center of Optic 2.2125”)
*50 mm lens (LA1131-B-ML)
LMR1 (SM1 fixed mount)
1/2” post
1/2 post base
775 nm camera
SM1A9 (converts internal C-mount to internal SM1)
SM1L10 (SM1 lens tube, 1” long)
SM1RR (2)
*MLA300-14AR-M (microlens array, f = 14.2 mm, 9 mm square window)
I believe we have everything except the microlens array, 0.5" pedestal posts, and maybe the lens. I will check no later than Monday.
We have everything except the lens tube, lens tube converter, micro lens array, and 50 mm lens.
I realized the SM1A39 and SM1M10, both of which we don't have, will be an easier setup.