[Torrey, Daniel]

I designed a part to hold this flexible metal conduit around the laser amplifier input and output fibers. It works by using a set screw to clamp on the conduit. It is made of 2 parts so that it can easily be interchanged around the fiber. It mounts on the #10-32 screws on the 19" rack. 

After making these parts with the water jet and mill, I cleaned them.

Torrey and I then put the amplifier output through the tube using gravity. We protected the amplifier output using kapton tape.

Attached are SolidWorks Part Files, STEP files, WaterJet files, Drawings, and photos.